All checks were successful
		
		
	
	continuous-integration/drone/push Build is passing
				
			
		
			
				
	
	
		
			155 lines
		
	
	
		
			5.0 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			155 lines
		
	
	
		
			5.0 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| #include "esp_eth.h"
 | |
| #include "esp_eth_mac.h"
 | |
| #include "esp_eth_com.h"
 | |
| #include "esp_eth_mac.h"
 | |
| #include "esp_eth_phy.h"
 | |
| #include "esp_err.h"
 | |
| #include "esp_event.h"
 | |
| #include "esp_netif.h"
 | |
| #include "driver/gpio.h"
 | |
| #include "esp_log.h"
 | |
| #include "system.h"
 | |
| 
 | |
| static const char *TAG = "ethernet";
 | |
| 
 | |
| static bool network_ready = false;
 | |
| 
 | |
| /** Event handler for Ethernet events */
 | |
| static void eth_event_handler(void *arg, esp_event_base_t event_base,
 | |
|                               int32_t event_id, void *event_data)
 | |
| {
 | |
|     uint8_t mac_addr[6] = {0};
 | |
|     /* we can get the ethernet driver handle from event data */
 | |
|     esp_eth_handle_t eth_handle = *(esp_eth_handle_t *)event_data;
 | |
| 
 | |
|     switch (event_id)
 | |
|     {
 | |
|     case ETHERNET_EVENT_CONNECTED:
 | |
|         esp_eth_ioctl(eth_handle, ETH_CMD_G_MAC_ADDR, mac_addr);
 | |
|         ESP_LOGI(TAG, "Ethernet Link Up");
 | |
|         ESP_LOGI(TAG, "Ethernet HW Addr %02x:%02x:%02x:%02x:%02x:%02x",
 | |
|                  mac_addr[0], mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
 | |
|         break;
 | |
|     case ETHERNET_EVENT_DISCONNECTED:
 | |
|         ESP_LOGI(TAG, "Ethernet Link Down");
 | |
|         network_ready = false;
 | |
|         break;
 | |
|     case ETHERNET_EVENT_START:
 | |
|         ESP_LOGI(TAG, "Ethernet Started");
 | |
|         break;
 | |
|     case ETHERNET_EVENT_STOP:
 | |
|         ESP_LOGI(TAG, "Ethernet Stopped");
 | |
|         network_ready = false;
 | |
|         break;
 | |
|     default:
 | |
|         break;
 | |
|     }
 | |
| }
 | |
| 
 | |
| /** Event handler for IP_EVENT_ETH_GOT_IP */
 | |
| static void got_ip_event_handler(void *arg, esp_event_base_t event_base,
 | |
|                                  int32_t event_id, void *event_data)
 | |
| {
 | |
|     ip_event_got_ip_t *event = (ip_event_got_ip_t *)event_data;
 | |
|     const esp_netif_ip_info_t *ip_info = &event->ip_info;
 | |
| 
 | |
|     ESP_LOGI(TAG, "Ethernet Got IP Address");
 | |
|     ESP_LOGI(TAG, "~~~~~~~~~~~");
 | |
|     ESP_LOGI(TAG, "ETHIP:" IPSTR, IP2STR(&ip_info->ip));
 | |
|     ESP_LOGI(TAG, "ETHMASK:" IPSTR, IP2STR(&ip_info->netmask));
 | |
|     ESP_LOGI(TAG, "ETHGW:" IPSTR, IP2STR(&ip_info->gw));
 | |
|     ESP_LOGI(TAG, "~~~~~~~~~~~");
 | |
| 
 | |
|     network_ready = true;
 | |
| }
 | |
| 
 | |
| void ethernet_init()
 | |
| {
 | |
|     if (esp_netif_init() != ESP_OK)
 | |
|     {
 | |
|         ESP_LOGE(TAG, "esp_netif_init failed!");
 | |
|         reboot();
 | |
|     }
 | |
| 
 | |
|     esp_err_t err = esp_event_loop_create_default();
 | |
|     if (err != ESP_OK && err != ESP_ERR_INVALID_STATE)
 | |
|     {
 | |
|         ESP_LOGE(TAG, "esp_event_loop_create_default failed!");
 | |
|         reboot();
 | |
|     }
 | |
| 
 | |
|     ESP_LOGI(TAG, "Initializing Ethernet MAC for WirelessTag WT32-ETH01...");
 | |
|     eth_esp32_emac_config_t mac_config = ETH_ESP32_EMAC_DEFAULT_CONFIG();
 | |
|     mac_config.clock_config.rmii.clock_mode = EMAC_CLK_EXT_IN;
 | |
|     mac_config.clock_config.rmii.clock_gpio = EMAC_CLK_IN_GPIO;
 | |
|     mac_config.smi_gpio.mdc_num = GPIO_NUM_23;
 | |
|     mac_config.smi_gpio.mdio_num = GPIO_NUM_18;
 | |
| 
 | |
|     eth_mac_config_t eth_mac_config = ETH_MAC_DEFAULT_CONFIG();
 | |
|     eth_mac_config.sw_reset_timeout_ms = 1000;
 | |
|     esp_eth_mac_t *mac = esp_eth_mac_new_esp32(&mac_config, ð_mac_config);
 | |
|     if (mac == NULL)
 | |
|     {
 | |
|         ESP_LOGE(TAG, "esp_eth_mac_new_esp32 failed!");
 | |
|         reboot();
 | |
|     }
 | |
| 
 | |
|     ESP_LOGI(TAG, "Initializing Ethernet PHY (LAN8720A) for WT32-ETH01...");
 | |
|     eth_phy_config_t phy_config = ETH_PHY_DEFAULT_CONFIG();
 | |
|     phy_config.phy_addr = 1;
 | |
|     phy_config.reset_gpio_num = -1;
 | |
|     esp_eth_phy_t *phy = esp_eth_phy_new_lan87xx(&phy_config);
 | |
| 
 | |
|     // Enable external oscillator (pulled down at boot to allow IO0 strapping)
 | |
|     ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT));
 | |
|     ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1));
 | |
|     ESP_LOGI(TAG, "Starting Ethernet interface...");
 | |
| 
 | |
|     // Install and start Ethernet driver
 | |
|     esp_eth_config_t eth_config = ETH_DEFAULT_CONFIG(mac, phy);
 | |
|     esp_eth_handle_t eth_handle = NULL;
 | |
|     ESP_ERROR_CHECK(esp_eth_driver_install(ð_config, ð_handle));
 | |
|     if (eth_handle == NULL)
 | |
|     {
 | |
|         ESP_LOGE(TAG, "esp_eth_driver_install failed!");
 | |
|         reboot();
 | |
|     }
 | |
| 
 | |
|     esp_netif_config_t const netif_config = ESP_NETIF_DEFAULT_ETH();
 | |
|     esp_netif_t *global_netif = esp_netif_new(&netif_config);
 | |
|     esp_eth_netif_glue_handle_t eth_netif_glue = esp_eth_new_netif_glue(eth_handle);
 | |
|     if (eth_netif_glue == NULL)
 | |
|     {
 | |
|         ESP_LOGE(TAG, "esp_eth_new_netif_glue failed!");
 | |
|         reboot();
 | |
|     }
 | |
|     ESP_ERROR_CHECK(esp_netif_attach(global_netif, eth_netif_glue));
 | |
|     ESP_ERROR_CHECK(esp_eth_start(eth_handle));
 | |
|     ESP_LOGI(TAG, "Started Ethernet interface!");
 | |
| 
 | |
|     // Register user defined event handers
 | |
|     ESP_ERROR_CHECK(esp_event_handler_register(ETH_EVENT, ESP_EVENT_ANY_ID, ð_event_handler, NULL));
 | |
|     ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_ETH_GOT_IP, &got_ip_event_handler, NULL));
 | |
| }
 | |
| 
 | |
| bool ethernet_is_ready()
 | |
| {
 | |
|     return network_ready;
 | |
| }
 | |
| 
 | |
| void ethernet_wait_for_network()
 | |
| {
 | |
|     for (size_t i = 0; i < 1000 && !network_ready; i++)
 | |
|     {
 | |
|         ESP_LOGI(TAG, "Wait for network %d / 1000", i);
 | |
|         system_sleep(1);
 | |
|     }
 | |
| 
 | |
|     if (!network_ready)
 | |
|     {
 | |
|         ESP_LOGE(TAG, "Failed to acquire network, will reboot!");
 | |
|         reboot();
 | |
|     }
 | |
| 
 | |
|     ESP_LOGI(TAG, "Network is now available");
 | |
| } |