Update setup configuration

This commit is contained in:
Pierre HUBERT 2024-01-11 19:38:27 +01:00
parent 6c23951d74
commit 96d264d15f

View File

@ -102,7 +102,8 @@ sudo systemctl start virtweb
You should now be able to create VMs! You should now be able to create VMs!
### Manual port forwarding without a LibVirt HOOK
## Configure port forwarding
* Allow ip forwarding in the kernel: edit `/etc/sysctl.conf` and uncomment the following line: * Allow ip forwarding in the kernel: edit `/etc/sysctl.conf` and uncomment the following line:
``` ```
@ -115,85 +116,14 @@ net.ipv4.ip_forward=1
sudo sysctl -p /etc/sysctl.conf sudo sysctl -p /etc/sysctl.conf
``` ```
* Create the following IPTables rules: * Configure apparmore service. Create or update a file named `/etc/apparmor.d/local/usr.sbin.libvirtd` with the following content:
``` ```
UP_DEV=$(ip a | grep "192.168.1." -B 2 | head -n 1 | cut -d ':' -f 2 | /usr/local/bin/virtweb_backend ux,
tr -d ' ')
LOCAL_DEV=$(ip a | grep "192.168.25." -B 2 | head -n 1 | cut -d ':' -f 2 | tr -d ' ')
echo "$UP_DEV -> $LOCAL_DEV"
GUEST_IP=192.168.25.189
HOST_PORT=8085
GUEST_PORT=8085
# connections from outside
sudo iptables -I FORWARD -o $LOCAL_DEV -d $GUEST_IP -j ACCEPT
sudo iptables -t nat -I PREROUTING -p tcp --dport $HOST_PORT -j DNAT --to $GUEST_IP:$GUEST_PORT
``` ```
* Theses rules can be persisted using `iptables-save` then, or using a libvirt hook. * Update Apparmor configuration:
### Manual port forwarding with a LibVirt HOOK
* Allow ip forwarding in the kernel: edit `/etc/sysctl.conf` and uncomment the following line:
```
net.ipv4.ip_forward=1
```
* To reload `sysctl` without reboot:
```
sudo sysctl -p /etc/sysctl.conf
```
* Get the following information, using the web ui or `virsh`:
* The name of the target guest
* The IP and port of the guest who will receive the connection
* The port of the host that will be forwarded to the guest
* Stop the guest if its running, either using `virsh` or from the web ui
* Create or append the following content to the file `/etc/libvirt/hooks/qemu`:
```bash ```bash
#!/bin/bash sudo apparmor_parser -r /etc/apparmor.d/usr.sbin.libvirtd
# IMPORTANT: Change the "VM NAME" string to match your actual VM Name.
# In order to create rules to other VMs, just duplicate the below block and configure
# it accordingly.
if [ "${1}" = "VM NAME" ]; then
# Update the following variables to fit your setup
GUEST_IP=
GUEST_PORT=
HOST_PORT=
if [ "${2}" = "stopped" ] || [ "${2}" = "reconnect" ]; then
/sbin/iptables -D FORWARD -o virbr0 -p tcp -d $GUEST_IP --dport $GUEST_PORT -j ACCEPT
/sbin/iptables -t nat -D PREROUTING -p tcp --dport $HOST_PORT -j DNAT --to $GUEST_IP:$GUEST_PORT
fi
if [ "${2}" = "start" ] || [ "${2}" = "reconnect" ]; then
/sbin/iptables -I FORWARD -o virbr0 -p tcp -d $GUEST_IP --dport $GUEST_PORT -j ACCEPT
/sbin/iptables -t nat -I PREROUTING -p tcp --dport $HOST_PORT -j DNAT --to $GUEST_IP:$GUEST_PORT
fi
fi
``` ```
* Make the hook executable:
```bash
sudo chmod +x /etc/libvirt/hooks/qemu
```
* Restart the `libvirtd` service:
```bash
sudo systemctl restart libvirtd.service
```
* Start the guest
> Note: this guide is based on https://wiki.libvirt.org/Networking.html