VirtWeb/virtweb_docs/SETUP_PROD.md

# Setup for prod

## Build VirtWeb for production
Open a terminal in the root directory of the VirtWeb project, and run the following command:

```bash
make
```

The release file will be available in `virtweb_backend/target/release/virtweb_backend`. 

This is the only artifcat that must be copied to the server. It is recommended to copy it to the `/usr/local/bin` directory.

## Install requirements
In order to work properly, VirtWeb relies on `libvirt`, `qemu` and `kvm`:

```bash
sudo apt install qemu-kvm libvirt-daemon-system libvirt0 libvirt-clients libvirt-daemon bridge-utils
```

## Dedicated user
It is recommended to have a dedicated non-root user to run LibVirt:

```bash
sudo adduser --disabled-login virtweb
sudo adduser virtweb libvirt
sudo adduser virtweb kvm
```

When executing this command as this user, it is possible to use the following command:;

```bash
sudo -u virtweb bash
```

## Create Virtweb configuration & storage directory
Inside the newly created user, create an environment file that will contain the configuration of the VirtWeb software:

```bash
sudo touch /home/virtweb/virtweb-env
sudo chmod 600 /home/virtweb/virtweb-env
sudo chown virtweb:virtweb /home/virtweb/virtweb-env

sudo mkdir /home/virtweb/storage
sudo chown virtweb:kvm /home/virtweb/storage
```

Edit the configuration content:

```conf
LISTEN_ADDRESS=0.0.0.0:8000
WEBSITE_ORIGIN=http://localhost:8000
SECRET=<rand>
AUTH_USERNAME=user
AUTH_PASSWORD=changeme
DISABLE_OIDC=true
STORAGE=/home/virtweb/storage
```

## Register Virtweb service
Before registering service, check that the configuration works correctly:

```bash
sudo -u virtweb virtweb_backend -c /home/virtweb/virtweb-env
```

Create now a service in the file `/etc/systemd/system/virtweb.service`:

```conf
[Unit]
Description=VirtWeb
After=syslog.target
After=network.target

[Service]
RestartSec=2s
Type=simple
User=virtweb
Group=virtweb
WorkingDirectory=/home/virtweb
ExecStart=/usr/local/bin/virtweb_backend -c /home/virtweb/virtweb-env
Restart=always
Environment=USER=virtweb 
HOME=/home/virtweb

[Install]
WantedBy=multi-user.target
```

Enable and start the created service:

```bash
sudo systemctl enable virtweb
sudo systemctl start virtweb
```

You should now be able to create VMs!

### Manual port forwarding without a LibVirt HOOK
* Allow ip forwarding in the kernel: edit `/etc/sysctl.conf` and uncomment the following line:

```
net.ipv4.ip_forward=1
```

* To reload `sysctl` without reboot:

```
sudo sysctl -p /etc/sysctl.conf
```

* Create the following IPTables rules:

```
UP_DEV=$(ip a | grep "192.168.1." -B 2 | head -n 1 | cut -d ':' -f 2 |
 tr -d ' ')
LOCAL_DEV=$(ip a | grep "192.168.25." -B 2 | head -n 1 | cut -d ':' -f 2 | tr -d ' ')
echo "$UP_DEV -> $LOCAL_DEV"

GUEST_IP=192.168.25.189
HOST_PORT=8085
GUEST_PORT=8085

# connections from outside
sudo iptables -I FORWARD -o $LOCAL_DEV -d  $GUEST_IP -j ACCEPT
sudo iptables -t nat -I PREROUTING -p tcp --dport $HOST_PORT -j DNAT --to $GUEST_IP:$GUEST_PORT
```

* Theses rules can be persisted using `iptables-save` then, or using a libvirt hook.


### Manual port forwarding with a LibVirt HOOK
* Allow ip forwarding in the kernel: edit `/etc/sysctl.conf` and uncomment the following line:

```
net.ipv4.ip_forward=1
```

* To reload `sysctl` without reboot:

```
sudo sysctl -p /etc/sysctl.conf
```

* Get the following information, using the web ui or `virsh`:
	* The name of the target guest
	* The IP and port of the guest who will receive the connection
	* The port of the host that will be forwarded to the guest

* Stop the guest if its running, either using `virsh` or from the web ui

* Create or append the following content to the file `/etc/libvirt/hooks/qemu`:

```bash
#!/bin/bash

# IMPORTANT: Change the "VM NAME" string to match your actual VM Name.
# In order to create rules to other VMs, just duplicate the below block and configure
# it accordingly.
if [ "${1}" = "VM NAME" ]; then

 # Update the following variables to fit your setup
 GUEST_IP=
 GUEST_PORT=
 HOST_PORT=

 if [ "${2}" = "stopped" ] || [ "${2}" = "reconnect" ]; then
  /sbin/iptables -D FORWARD -o virbr0 -p tcp -d $GUEST_IP --dport $GUEST_PORT -j ACCEPT
  /sbin/iptables -t nat -D PREROUTING -p tcp --dport $HOST_PORT -j DNAT --to $GUEST_IP:$GUEST_PORT
 fi
 if [ "${2}" = "start" ] || [ "${2}" = "reconnect" ]; then
  /sbin/iptables -I FORWARD -o virbr0 -p tcp -d $GUEST_IP --dport $GUEST_PORT -j ACCEPT
  /sbin/iptables -t nat -I PREROUTING -p tcp --dport $HOST_PORT -j DNAT --to $GUEST_IP:$GUEST_PORT
 fi
fi
```

* Make the hook executable:

```bash
sudo chmod +x /etc/libvirt/hooks/qemu
```

* Restart the `libvirtd` service:

```bash
sudo systemctl restart libvirtd.service
```

* Start the guest


> Note: this guide is based on https://wiki.libvirt.org/Networking.html